Eco-Friendly Concrete Cleaning Solutions

Looking for a greener alternative to a traditional concrete cleaner, rust remover, or concrete etcher?

Offering a range of innovative products including Slurry Dry SSG, Slurrysep Floc, and SlurrySafe AR, Slurry Solutions is committed to developing high-performance acid replacement concrete cleaning and slurry management solutions that are not only effective but also ensure the safety of your workers and our environment.

Say goodbye to stubborn stains, residue, and dirt without harming the planet! Our greener, heavy duty concrete cleaner delivers exceptional results while protecting the environment. Whether it’s a driveway, patio, commercial space, or industrial facility, we combine cutting-edge technology with eco-conscious principles to create products that clean your concrete effectively and responsibly. Get in touch with us today to find out more.

How to Get the Best Results with Our Concrete Paving Cleaner

Here is a guide for cleaning and etching.

The Basics

1. Be sure the concrete is free of all sealers, curing compounds, and contaminants as these prohibit the reaction of SlurrySafe to the calcium and lime inherent in concrete. Pretest a small area to determine effective concentration and dwell time (3-15 minutes).
2. White foaming must occur to confirm proper chemical reaction upon contact. Allow sufficient dwell time, keeping the solution wet to achieve desired profile level.
3. Work in small manageable sections to avoid letting the solution dry. Apply evenly with a pump sprayer or spread uniformly with a hard bristle brush.
4. After the 3 to 15 minute dwell time as determined by your test patch, water rinse with agitation by hard bristle brush, power washer, or floor machine with a black scrubbing pad to thoroughly clean of all concrete dust residue with clean rinse water. Repeat as necessary to ensure all residue has been removed.
5. For Etching Only – You want to observe small micro pores in the concrete after completion. Lightly spray water in a test area to confirm water absorbs immediately and darkens the concrete. Repeat etching process and increase dwell time to ensure optimum profiling if necessary.

Etching Vs Cleaning – To etch, you should not wet the surface prior to applying the concrete cleaner. To etch, pre-wet the surface prior to adding SlurrySafe AR. Mixing ratios are dependent on the stain and dirt build up.

Important – SlurrySafe AR is not intended to be a coating stripper. It will not remove paints, pigmented stains, sealers, and may not react if there is still evidence of a topical polymer concrete hardener.

Shop Environmentally Friendly Industrial Concrete Cleaner and More Today

We aim to inspire an environmentally friendly approach to preparing, etching and cleaning masonry surfaces and managing slurry waste in the construction industry. If you would like to find out more about our products or implement our acid replacement cleaner into your workplace reach out to us today online or call 1300 622 175.